3 gauge angled under dash gauge cluster 2inch/52mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
hold's three 2 inch/52mm gauges
- Rating
- 0 / 5
- Likes
- 0
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Standard Digital File License
a 3 gauge, gauge cluster mount for underneath the dash. Width is 9 inches and the height is 3.750 with a front to back depth of 2.562 mounting holes are .188
i personally designed it for my 1968 chevy c30 dump truck so i could have, temp , oil pressure and the amp gauge all mounted cleanly. the gauges are tilted towards the driver at a 5 degree angle and up at a 10 degree angle.
i printed it in sunlu easy pa, it should be fine with pla but i haven't printed it in that material yet
for infill i used adaptive cubic at 15% and i printed it tilted at a 45 Degree angle to keep the supports from messing up the fitment of the gauges and the seam position set to nearest. all other settings were the stock settings for my printer (qidi q1 pro) slicer used was orca slicer. i included a 3mf file that has it in the orientation that i printed it in
i used 8-32 screws,wide washers and rivet nuts to mount it to the dash