SSUPD Meshlicious bracket for EK-AF passthrough port.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket to fit an EKWB EK-AF passthrough at the top of the SSUPD Meshlicious PC case to use as a fill/bleed port.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 703
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- BSD License
This bracket allows you to fit an EKWB EK-AF passthrough at the top of your SSUPD Meshlicious PC case to use as a fill/bleed port. The port is recessed and does not interfere with the lid of the case. This version fits the case with the divider in the right position as I assume that's what most water cooled builds in this case will use, but if there's a need it should be easy enough to extend it to fit the left position as well.
You will need to drill and countersink a hole in the edge frame of the case to support one side of the bracket with either an M3 or No 4 (1/8") countersunk screw. The bracket hole is oval so the drilled hole does not need to be precisely placed.
Additional parts needed:
1x EK-AF Pass-through https://www.ekwb.com/shop/ek-af-pass-through-g1-4-nickel
1x EK Plug https://www.ekwb.com/shop/ek-plug-g1-4
1x M3x12 (or No 4 x 1/2") countersunk machine screw, along with washer and nut.