adjustable torque wrench prototype, fully 3d printed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
fully 3d printed torque wrench (except the screws, but you can use glue instead) 3/8 adapter included
- Ocena
- 0 / 5
- Polubienia
- 43
- Pobrania
- 106
- Wydruki
- 0
- Wyświetlenia
- 1550
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE 2: two new stronger spring files added, to be tested spring v2.1 and v2.2
UPDATE 1: tested with a scale and with spring v2.0 I got 3kgf with a lever of 6.9cm which is about 2Nm torque, not as strong as I thought but the spring can be made thicker and taller, to there is room for improvement, nothing broke, but the spring bottomed out
has fine adjustment, use PETG, I used recycled PET bottle filament from my pullstruder.
you should use a calibration lever and a scale for precise torque setting.
supports are needed for some parts