Low Profile Snowboard Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple snowboard wall mount to be able to hang up to a 11.5mm thick snowboard to the wall for storage or decoration.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 361
- Wydruki
- 3
- Wyświetlenia
- 1688
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Public Domain
Simple snowboard wall mount to be able to hang up to a 11.5mm thick snowboard to the wall for storage or decoration. Holds the board at a slight angle to prevent tipping and is low profile to optimize distance from the wall. Holes are built for #9 standard wood screws. I used 2.5" long screws but your mounting needs may be different. Obviously you need to print 2, and they fit nicely on a single print on my MK3S+. I printed mine out of PETG using a 0.6mm nozzle and 0.25mm layer height.
If you are hanging between standard US 16" on center wall studs, my binding configuration did not allow me to mount cleanly between or straddle the bindings to I have my board slightly offset but your binding configuration and size of board may allow for a somewhat cleaner mounting, especially if you remove the bindings.
Check out my ski and pole mount if you own a pair of ski's as well. Designed in a similar style to match the snowboard mounts. https://www.printables.com/model/401673-ski-and-pole-wall-mount