1 / 3
IKEA Sektion (North America) kitchen cabinet draw light cable supports
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cable support for IKEA Sektion kitchen lower cabinet draw lights. Requires IKEA bolt 10046940 (free from IKEA)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 681
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — NoDerivatives
To use this part, will require:
- Print this part (however many required, we found 4-5 worked well)
: PETG (seems to work well)
: 25% infill
: Print on its back (supports for the half moon cable hole) - 1 x IKEA screw 10046940
: free from IKEA - in Canada i can get these online from IKEA delivered FREE (no shipping costs) through their website
: Its the same screw used in the SEKTION cabinet wall support bracket, for testing print this part and use a supplied screw, when happy order more (free) screws
IKEA SEKTION kitchen cabinets (North America) can have draws with LED lighting (MITTLED), they are supplied with a small channel to support the cable to the back of the cabinet, however nothing to guide the cable to the base, so sometimes will interfere with the draws when in use.
These cable supports screw in to the holes in back of the cabinet that are used for the draw runner supports (via the above IKEA screw).
UPDATES:
- 10 Mar 2023 - Added (((G icon
- 9 Mar 2023 - Made inner hole 0.4mm larger as fracturing was seen
- 9 Mar 2023 - Print on its back to stop fractering by how the PETG is laid on to the print bed