Nitecore Tube light clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip for the Nitecore Tube rechargeable keychain light. Attach the light to the brim of a cap for an ultralight headlamp
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 664
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Clip for the Nitecore Tube keychain light (tested with version 2.0, but the original one should have the same dimensions). Intended for attaching the light to a cap brim to turn it into an ultralight headlamp.
The thing consist of two parts to be glued together (superglue works well on most printed plastic). This way, both the pieces are oriented well for maximal strength.
I printed it out of PCTG which offers good mix of stiffness and robustness. Other materials will do too, but may have some limitations.
There are two versions of the thing - a “light” one (with a thinner clip holding the light) and a more robust one. I find the light one working OK. If a softer plastic was used (ABS) or you prefer more robust gear, there's the “stronger” option.