Gundam Marker Gridfinity Bins
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gundam Marker holders designed for the Gridfinity system.
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 302
- Wydruki
- 4
- Wyświetlenia
- 2275
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Gridfinity-compatible bins for holding GSI-Creos Gundam markers. There are 4 bins:
- one for holding the 6 packs of alcohol markers such as the SEED or Zeon set
- one for holding the pour-type marker sets (5 pour-types + larger eraser marker)
- one for holding the Metallic marker sets
- one for holding the real-touch marker sets
- one for holding 6 of either the pour-type or ultra-fine panel lining markers
The holes are offset diagonally, and each row is offset to give a 10mm height different to aid access. The holes for the wider markers are 14.5mm, and for the thinner markers are 11.5mm, both provide plenty of clearance. The real-touch mark bin is 12.3mm wide with a 0.5 degree taper.
Also included is a small paint palette that will fit into the small crevice at the front - I advise printing this in white PLA. You can then use this as a quick reference should you wish.
I printed these using Elegoo Black PLA and Sunlu Purple PLA with 10% Cubic infill, brims to help prevent warping, 200C, 0.24mm layer height.
If you'd like to generate some of your own, please take a look at my OnShape parametric Gridfinity generator - these were created with V7.
These models only include magnet holes, not screw holes.