Gundam Marker Gridfinity Bins
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gundam Marker holders designed for the Gridfinity system.
- Rating
- 5 / 5
- Likes
- 55
- Downloads
- 302
- Makes
- 4
- Views
- 2,275
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Gridfinity-compatible bins for holding GSI-Creos Gundam markers. There are 4 bins:
- one for holding the 6 packs of alcohol markers such as the SEED or Zeon set
- one for holding the pour-type marker sets (5 pour-types + larger eraser marker)
- one for holding the Metallic marker sets
- one for holding the real-touch marker sets
- one for holding 6 of either the pour-type or ultra-fine panel lining markers
The holes are offset diagonally, and each row is offset to give a 10mm height different to aid access. The holes for the wider markers are 14.5mm, and for the thinner markers are 11.5mm, both provide plenty of clearance. The real-touch mark bin is 12.3mm wide with a 0.5 degree taper.
Also included is a small paint palette that will fit into the small crevice at the front - I advise printing this in white PLA. You can then use this as a quick reference should you wish.
I printed these using Elegoo Black PLA and Sunlu Purple PLA with 10% Cubic infill, brims to help prevent warping, 200C, 0.24mm layer height.
If you'd like to generate some of your own, please take a look at my OnShape parametric Gridfinity generator - these were created with V7.
These models only include magnet holes, not screw holes.