Search results: gunpla

Counting matching models…

Printables

1/144 Gunpla Base - Skadis Mount

This depends on the 1/144 Gunpla Base by Soozafone (see remixed from). For most Models you should only need the 30mm arm segment and the Peg Adapter.

Order a print of this model

Printables

Lid with original gasket for the Filament Storage 2026 by GunplaMark

I wondered if it would be possible to reuse the existing gasket of the cereal boxes for Mark's models. So I made the channel deeper and relocated the filament hole. Right now, I printed two, and they seal as well as the original ones. The…

Order a print of this model

Printables

TPU Lid Gasket for @GunplaMark's Filament Storage 2026

This TPU Lid Gasket for the Filament Storage 2026 drybox is a 3D-printed option to replace the 3mm Silicone foam cord that must be purchased and custom-sized to seal the lid on Mark's new drybox. This TPU Lid Gasket must be printed in 85A…

Order a print of this model

Printables

Extended Rewinder Shaft from GunplaMark Filament Storage 2026

The filament storage system by GunplaMark in 2026 is great. To me, the best part is the rewinder, which is a simplified version of a pre-existing rewinder. Now it uses metal as opposed to plastic springs. If you are like me, you may not…

Order a print of this model

Printables

Omniwall Panel Mount Brackets for GunplaMark's Filament Storage 2026

These brackets fit onto Omniwall metal pegboard panels with the correct spacing to hang rows of GunplaMark's Filament Storage 2026 containers. Spacing will allow 6 dryboxes across a 32" wide panel. Both STL files will load into your…

Order a print of this model

Printables

Filament Swatch for the Filament Storage 2026 Box by GunplaMark

I went through a lot of existing filament swatch designs and kept running into the same issue—they included information I didn’t need, like layer height, and left out things I actually do use. So I designed my own with a more practical,…

Order a print of this model

Printables

Gunpla Action Base Wall Mount

3D printing settings Bambu Lab A1 PLA/PETG Supports: Yes .2mm layer height Simply slots into the action base holes from underneath

Order a print of this model

Printables

Gunpla Display Arm for Honeycomb Storage Wall

These are all the parts needed to build display arms in various configurations. Here's what you'll need to print: Two of the arm parts, at whatever lengths are needed given the size of your built kit. Normally you'll want two different…

Order a print of this model

Printables

Honeycomb Storage Wall - Gunpla Display Arms

I found myself with a large pile of HG kits to build and not enough shelf space to display them, so I turned to the obvious solution: Honeycomb Storage Wall! I designed these to print flat on the build plate with no support and in a way…

Order a print of this model

Printables

GunPla Runner Shelf

Gunpla Runner Shelf. If you have gunpla hobby. This thing is very useful. (I think..) 180X196X130 Size. (Almost fit MG Runner Size) You need to print Gunpla Shelf Rev1 X 1EA Stand Part X 2EA

Order a print of this model

Printables

GunPla Runner Shelf Ver.3

Gunpla Runner Shelf. If you have gunpla hobby. This thing is very useful. (I think..) 196X189X105 Size. (Almost fit MG Runner Size) You need to print only 1 file.

Order a print of this model

Printables

Linkable Sorting Tray - Hive - Gunpla inspired

-This is your Gun Pla-worth tray set. Hexagonal shape trays - 124mm (4.88") x 19mm (0.75") 5 unique designs patterns. Use them individually or linked. Connector will link trays at all 6 sides - infinit linkage! Hive-like arrangement…

Order a print of this model

Printables

Rotated Gunpla Display Arm for Honeycomb Storage Wall

Rebuilt from step file of Honeycomb Storage Wall Insert-Full and copied the measurements of the original base by GunplaMark! Now you can choose the proper one for however you mount your HSW.

Order a print of this model

Printables

Gunpla Tool Carry Case

This is a carry case for the essential gunpla tools. There are 4 slots for Sakura Micron pens to cover most colors needed for panel lining, 1 slot for tweezers for placing stickers, and one slot for nippers for removing the plastic from…

Order a print of this model

Printables

Gunpla Tool Kit DSPIAE Remix

I liked the Original by @ParentalDisappointment on thingiverse, that I found on reddit, but i wouldn't hold my DSPIAE soft tipped markers. I also wanted it to hold the cotton bud boxes I made for panel lining and decals. So I modified it…

Order a print of this model

Printables

Gunpla Magnetic LED Adapter

I was tired of Bandai's LED units be so annoying to deal with (unreliable, annoying to turn on, expensive) so i made an adapter for these cheap magnetically activated LED's from aliexpress. Link for the Aliexpress LED's:…

Order a print of this model

Printables

Skinny Gunpla/Sprue Holder

Remixed with longer trenches, as well as less material cost. Remixed with no needs for supports.

Order a print of this model

Printables

Updated Gunpla Hanger

I wanted the side panels to touch the back so I extended the back wall and added bowtie connectors to fix any warp in the prints. print 2 of the bowties and one of everything else, you will need supports for the hooks and tabs

Order a print of this model

Printables

Storage and exhibition stand for gunpla

here is a storage and display stand for gunpla 1/144 hg. options with the arm to hold the gundan will come later

Order a print of this model

Printables

Container for Gunpla Runner Vertical Stand

Designed to hold 6 Gunpla Runner Vertical Stand.

Order a print of this model

Printables

Gunpla Toolbox EFSF Sign

This is a sign for labeling your standard-issue Earth Federation Space Force Mobile Suit Repair kit. What's that? You LOST it!? Drop and give me 20, then download your replacement here:…

Order a print of this model

Printables

Storage and exhibition stand for gunpla REMIX

Love the original model but it's missing a piece so I tried making that missing piece myself. Haven't printed all the parts yet but will in the future. Named ‘fillings-lightgrey’ as it's the part that goes around the yellow corners.

Order a print of this model

Printables

Simple Gunpla Stand with 3mm hole

To finish the stand I'd recommend cutting a piece of runner/ 3mm rod and glueing it into the arm and glueing the arm into the base. I also uploaded the step files so you can modify the arm for rg/mg use, if you decide to do so please…

Order a print of this model

Printables

Gundam GUNPLA RG 1:144 Scale Nike Air Jordan Air Force 1

It's a jordan for a gundam. You can probably rescale it to fit other kits, I lost the blender file but it's not hard to edit. I made it to connect to the foot on the Build Strike Gundam Full Package, I'm not a massive gunpla guy (I've got…

Order a print of this model

Printables

Universal Round Hygrometer Holder - For GunplaMark's Filament Drybox

This should work with all round hygrometers available on Amazon https://amzn.to/44NGC1j Those tend to be more accurate with a minimum humidity reading limit of 10%. I also included a -30 degree tab version that works with the provided…

Order a print of this model

Printables

Peg for Modular Gunpla Plastic Model Runner Holder

The original runner holder is very useful, but it slides away from the bench (stand) easily. I just created a peg from the small hole on the runner holder, preventing it from sliding off the bench. You can still take it off by tilting the…

Order a print of this model

Printables

Gunpla Display Arm for Multiboard

Gunplay Display Arm adapter mouting point for Multiboard

Order a print of this model

Printables

Gunpla runner stand with lock click! click!

Gunpla runner with click click. Easy to use. has a lock click click. For customizing name and logo

Order a print of this model

Printables

SAB Chisel Handle for Gunpla

A SAB chisel handle & holder based on the model by side5 , redesigned for FDM printability without supports. Great for ergonomic panel line scribing on Gunpla model kits! Features include: Collet-style grip Knurled tip End cap Optional…

Order a print of this model

Printables

Hangar plate for 1/144 scale mechs/gunpla

The dimensions of the plate without the lip are 14.5 9 cm and should fit into 10 *15 cm picture frames the 3 versions include a plate without hole, one with a 3mm hole and one with a 7mm hole for bandai action bases. If you have any…

Order a print of this model

Printables

Action figure (Gunpla) stand with storage

This is a stand for action figures, Gunplas in particular, with additional storage space to store accesories like extra hands, small weapons or other stand adapters. Highlights: Printing 3mm pillars is hard to get perfect. I avoided this…

Order a print of this model

Printables

Reoriented Gunpla Dysplay arms

Since i opted to use the the HSW that was a different orientation found HERE i needed a way to attach my HG gundams to my wall. Took inspiration from this model HERE by @Shinohara_192963 You will need the counter sunk adaptors found HERE…

Order a print of this model

Printables

Simple Gunpla Tool Tray

Fairly simple Gunpla Tool Holder I made to keep on my desk behind my keyboard. Edges are rounded a bit to keep from chewing your fingers up when reaching for things. 2x Slots for Tamiya Panel Liners (40ml) or Small parts trays. 1x Large…

Order a print of this model

Printables

Gunpla Multiconnect Mount

Remixed a wall mount for Gundam models. I added multiple connector points, slimmed it down, shortened it, and added a Multiconnect rail to the back. Compatible with both Honeycomb Storage Wall and Multiboard, using Multiconnect V2. I…

Order a print of this model

Printables

Wall-mount Gunpla base

A simple stand for displaying 1/144 Gunpla on your wall, anything with a 3mm peg hole. Comes with an adapter for 1/100 kits as well. This is designed to hang from a standard Command hook, so no need to put holes in your apartment walls.…

Order a print of this model

Printables

Gunpla wall mount

Description from thingiverse: This is an adhesive variant of the "Wall-mount Gunpla base" by soozafone I have redesigned the mount from scratch, however the origin is from soozafone's variant

Order a print of this model

Printables

Gunpla Box Cutter Frame (TCG Size)

Frame to help cut Gunpla (and other) box tops into TCG size cards. Added the cutting lines so the knife can slide past to make a straighter, cleaner cut around the corners.

Order a print of this model

Printables

1/100 Scale MG Gunpla Model Base

1/100 Scale MG Gunpla Model Base. No Assembly Needed.

Order a print of this model

Printables

Gunpla Action Base 8 Replacement Piece

I've had a couple of these break on me, which is pretty frustrating given how expensive these are. Hammered this out real quick, and it seems to be a good fit! Wanted to share in case anyone else has some broken action bases.

Order a print of this model

Printables

Gunpla Display Arm - Multiboard Connectors

I love @GunplaMark's Gunpla Display Arm for Honeycomb Storage Wall. Problem, I use Multiboard. So I chopped off the HSW connector and spliced it onto a Bolt Lock connector and a Moderate Weight Bearing Snap. Standard Multiboard print…

Order a print of this model

Printables

Modular Gunpla Mech Hanger Diorama

Build as big a hanger as you like! The walls, floor, and base connectors all lock into place with the push fit bowties. I'd suggest slicing out just a hole and printing a connector to make sure your sizing works. There is a top and bottom…

Order a print of this model

Printables

Gunpla Build Organizer

A 7X7 and 7X6 storage space for Gunpla pieces after you've cut them from their runners. Each box is labeled 1-49 (or 42). Labeled some of these with A-E but included blank ones if you want to add labels yourself. Works best with EG, HG…

Order a print of this model

Printables

Simple + Stable Gunpla IKEA Skadis Mount

A very simple IKEA Skadis Gunpla mount. I made the angle less steep and added some supports so it should not sag even with PLA. The supports should also still leave room for most kits with back appendages. You only need a piece of runner…

Order a print of this model

Printables

1/144 Gunpla Base - Skadis Mount

This depends on the 1/144 Gunpla Base by Soozafone (see remixed from). For most Models you should only need the 30mm arm segment and the Peg Adapter.

Order a print of this model

Printables

Buster Sword (FF7) sized for hg/rg gunpla

posed with my mg wing gundam ew ver. cuz I can't spare a stand. included photo of it next to my rg nu gundam.

Order a print of this model

Printables

Gunpla Base Adapter Mount for IKEA Skadis

This depends on the 1/144 Gunpla base model . It replaces the “base” and the “base hinge” models with an adapter to mount to an IKEA Skadis. Printing Instructions This requires supports. Print in the following orientation with supports.

Order a print of this model

Printables

Lid with original gasket for the Filament Storage 2026 by GunplaMark

Order a print of this model

Printables

TPU Lid Gasket for @GunplaMark's Filament Storage 2026

Order a print of this model

Printables

Extended Rewinder Shaft from GunplaMark Filament Storage 2026

Order a print of this model

Printables

Filament Storage 2026 by GunplaMark with top feed

My configuration requires a top feed to the MMU3. So I added a hole. It should allow the TPU hole insert to work, but I haven't tested it yet since I'm out of TPU!

Order a print of this model

Printables

Omniwall Panel Mount Brackets for GunplaMark's Filament Storage 2026

Order a print of this model

Printables

Filament Swatch for the Filament Storage 2026 Box by GunplaMark

Order a print of this model

Printables

Spool Adapters for Filament Storage 2026 (GunplaMark)

About this model This is a set of spool adapters designed to be compatible with GunplaMark’s “Filament Storage 2026” system. It helps different filament spools fit more securely and roll more smoothly by adapting common spool core sizes.…

Order a print of this model

Printables

Gunpla Action Base Wall Mount

3D printing settings Bambu Lab A1 PLA/PETG Supports: Yes .2mm layer height Simply slots into the action base holes from underneath

Order a print of this model

Printables

GunplaMark FS2026 4.0L cereal box remix

I really liked the Filament Storage 2026 solution by GunplaMark, and I’m a big fan of his work. However, living in Europe means the cereal container he uses isn’t commonly available here. So I set out to find alternatives that are easier…

Order a print of this model

Printables

Parametric Extended Rewinder Shaft from GunplaMark Filament Storage 2026

Steven’s excellent extended rewinder shaft solved my problem with my spools falling out of the bracket on my filament dry boxes. The only problem was his part was too long for my needs, so I used slicer tricks to trim it to length. Slicer…

Order a print of this model

Printables

MULTIBOARD - 50 mm, Pegboard Click Hook Gunpla

Use this Click Hook to display your Gunpla Models 50 mm length 10deg or 45deg angle 5mm Octa peg 3mm peg adapter Print settings: 0.2mm layer height 3 walls 15% infill, preferrably gyroid Supports optional - For the 3mm peg adapter, I used…

Order a print of this model

Printables

Gunpla sprue mini holder

A simple gunpla sprue holder for easy sorting.

Order a print of this model

Printables

Comgrow Spool Adapter for Filament Storage 2026 (GunplaMark)

Following Mark's Spool Adapter Guide, I created an adapter for the Comgrow Spool. Scad Settings:

Order a print of this model

Printables

Gunpla/Plamo angled alligator clip holder

Printed with PETG. It's thin-walled so infill doesn't really matter, I'd recommend printing with two walls but you do you.

Order a print of this model

Printables

Gunpla/Plamo tool organiser

Three configurations: Five paint holders, four paint holders and no paint holders. For the Five/Four paint holders, print the side brackets with the quantities in the filename. For the configuration with no paint holders, don't print…

Order a print of this model

Printables

Polymaker 075 Kg center adapter for Gunplamark Filament Storage 2026

This fits the narrower 0.75 Kg Polymaker spools

Order a print of this model

Printables

Gunpla Runner Rack v1

WARNING - You may need to scale up the model by 2540% in your slicer Organizer for Gunpla runners: Holds 10 runners Slots are deep and tapered to accommodate a wide range of runner sizes Spaced 20mm (0.78 in) apart for easy retrieval and…

Order a print of this model

Printables

Bandai Gundam Gunpla HG IBO Gusion Rebake Full City part B44

Disclaimer: This is not a full model kit, it is a single part of a larger kit. Please support your local Bandai dealer. If you are bull in a china shop like me you'll break this part like I did. So I thought I could 3D print so I didn't…

Order a print of this model

Printables

230mm L26 rifle gunpla

This is a rifle designed to fit gunpla models. Comes in 3 parts, barrel, main body and magazine. Designed for resin printer, may not work on FDM Category: Model Robots

Order a print of this model

Printables

1/144 enclosed display base gunpla

This is a 1/144 enclosed display base for gunpla. This was an simple idea I had but some part that I was hoping to do with it did not work out, so I will put it up here and come back and see if there's anything i can do with this later.…

Order a print of this model

Printables

stands IPMS Gunpla & Mecha UK SIG

This is a stand I made for the IPMS Gunpla & Mecha UK SIG. Comes in 1/144, 1/100 and 1/60. the 1/144 and 1/100 are compatible with action base arms. The 1/60 is so large you will need a cr-10 to print. the 1/144 comes in 2 parts to fit…

Order a print of this model

Printables

Gunpla Logo

I made a simple Gunpla Logo. Is very thin, like 1-2 mm thick. 0.4 mm nozzle would be fine. I use a 0.6 mm nozzle and 0.3 mm layer height. Category: Signs & Logos

Order a print of this model

Printables

Gunpla Runner Wall Clip

ESP: Diseñé este clip para los runners de los gunpla. Si se adhiere con adhesivo de pared se pueden montar en la pared como se muestra en la primera foto. El clip es compatible con runners de diametro máximo de 3 mm (aprox. 2.7 mm). Si se…

Order a print of this model

Printables

Gunpla Sprue Desktop Organizer

Gundam Plamo Time! Organize your work in progress by printing this simple doodad. You can prop up the sprues by alphabetical order. Get that desk looking super pretty! Send pictures if you make one, or a tip for my own plamo addiction if…

Order a print of this model

Printables

Modular Gunpla Plastic Model Runner Holder

They are designed to print without support. Enjoy, Have fun!

Order a print of this model

Printables

High Grade Gunpla Stand

A custom designed Gunpla stand for models with fin funnel attachments or flying accessories. The body arm is directional. I based this on the stand included with the HGBD:R TRY AGE Magnum, I designed the funnel arms and cubes to fit the…

Order a print of this model

Printables

Weighted gunpla runner holder

Weighted gunpla runner holder, i used 4 M8*20mm bolts to weigh it down. No supports needed, printed in PLA

Order a print of this model

Printables

Gunpla Hangar

Created by SD3D_KONG and originally posted on Thingiverse (https://www.thingiverse.com/thing:2791853). It's an awesome print so I'm sharing it here so more people can discover it, but please take the time to check out the original post…

Order a print of this model

Printables

Gunpla Runner Vertical Stand

Fit runner size of 2.0, 2.5, and 3.0 mm.

Order a print of this model

Printables

1/144 Gunpla Base remixed

I loved Soozafone's base but had problems getting the pegs to not snap like a twig, so I removed the pegs and replaced them with a 5mm/ #10 screw. Was it the most elegant solution now but it works. Category: Toys & Games

Order a print of this model

Printables

MG Gunpla Adaptor GoPro Mount

Remix of the GoPro Straight Link 20mm. I used a 0.6mm nozzle at 0.3 layer height. 20% infill seems to be dense enough to keep the Gunpla secure. I have only tested it on the MGs I have but it works on the MG Providence, MG Deathscythe…

Order a print of this model

Printables

V-shaped holders for High Grade Gunpla Stand

Additional accessories for HarshEbar's excellent High Grade Gunpla Stand found here: https://www.printables.com/model/23 I needed a V-shaped holder for the Tactical Arms sword I have, so I made a few versions to fit. V2 is basically at…

Order a print of this model

Printables

Gunpla Runner stand

Remix of the great runner shelf by jay, remixed it to have the gunpla logo on the back.

Order a print of this model

Printables

Gunpla scribing guide - parametric

5 scribing guide, lower wall 1 mm to 5 mm high with parametric angle and heights. Parametric file for Fusion360. Example file for 30 deg angle

Order a print of this model

Printables

Gridfinity Compatible Vertical Gunpla Runner Stand

Model not printed/tested yet. Combined FunFunBoy's runner stand with a gridfinity blank.

Order a print of this model

Printables

X-base for Gunpla

Following on the awesome HG gunpla base found here: https://www.printables.com/model/232216-high-grade-gunpla-stand I started tinkering with my own design. This fits into the poly cap under the crotch of most modern HG kits. Improved…

Order a print of this model

Printables

Gunpla accesories

Fun

Order a print of this model

Printables

Gunpla Lap Tray Organizers

Most models should be able to be printed with no supports if your printer can bridge well enough. (Manual holder is the really the only one that can't) All models have .step files as well so if you have your own lap tray you can modify…

Order a print of this model

Printables

Gunpla Catapult Launch Motorization and LED Diorama Parts

It is a model that electrifies the catapult of robots such as gunpla. Please refer to the images and videos when assembling (the catapult launch speed has been edited). This file is provided as a free sample for personal, non-commercial…

Order a print of this model

Printables

Gunpla Base to IKEA Detolf

This part is used to soozafones Gunpla base to an IKEA Detolf glass display case and create aerial poses for your Gunpla. https://www.thingiverse.com/thing:2702736 Connector is friction fit, and can be combined with several of soonzafones…

Order a print of this model

Printables

Gunpla RG to 3mm Peg

This part is used to connect the 3mm hole/peg of soozafones Gunpla base to a Real Grade (RG) adaptor. https://www.thingiverse.com/thing:2702736 3mm Peg to RG - Connects directly to as printed base parts(shown in image) 3mm Hole to RG - If…

Order a print of this model

Printables

Gunpla Tool Box

you can use 40mm m3 for both latch pieces and the two hinges if you like. I just glue the bumpers on with super glue. Note the bumpers are not identical. they have cut outs in the back where the hinge is so print one of everything.…

Order a print of this model

Printables

Gunpla Hangar - Gundam base

I designed this impressive Gundam hangar, which consists of several standout features. Let me provide you with a detailed description: The hangar is a spacious interior space. It is surrounded by seven walls, which rise up and provide…

Order a print of this model

Printables

Super Simple Gunpla Base

This is a simple base I designed a while back. It uses a cut out of the runner to connect the kit to the base. It has a decent height and it's super sturdy. Good for a quick print for your new snap build.

Order a print of this model

Printables

Sanding Sticks for Gunpla(4 Size)

Please use a glass heated bed to maintain the true flatness of the surface for better polishing.

Order a print of this model

Printables

Lucky 13 Display base adaptor for Gunpla

@soozafone created a great ecosystem/framework for creation, and I made several sets of Lucky 13 figures. All happens when a day I need a stand for my new Gundam model and I realize that @soozafone already created a excellent display…

Order a print of this model

Printables

Gunpla RX-0 Full Psycho 1/100MG Ver.Ka Antenna

Like an idiot, I threw away the runner that had the alternate antenna still attached. I used the Unicorn antenna to get the shape right and then just mirrored it. I used high quality reference images to model the “face” side of the…

Order a print of this model

Printables

Parametric Gunpla Runner with GUND-ARM Logo (Updated)

Parametric version of the Gunpla Runner. It's printed as one piece, no assembly or supports required. Slightly easier to use, and provided model file if you want to make changes to it. The parameters you're most likely to modify are the…

Order a print of this model

Printables

Parametric Gunpla Paint Stick/Clip Holder - Gridfinity Refined

Paint Clip/Stick holder for Gunpla building. It's built on a Gridfinity Refined base, which is based on Gridfinity by Zack Freedman . Fully parametric, so it can be modified for how large you need it to be and the size of your clips. The…

Order a print of this model

Printables

Gunpla Nipper Holder x2 - Gridfinity Refined

Nipper Holder for 2 Godhand Nippers, side by side (such as the PN-120 and the SPN-120). The top of the holder has space for two 8x3mm magnets, to help ensure that the Nippers don't slide off. The bottom of the base also has a lip (not…

Order a print of this model

Printables

TR-5 feet kit gundam gunpla

TR-5 feet kit

Order a print of this model

Printables

Lucky 13 Display base adaptor for Gunpla 5mm RG

Found the original adaptor but it didn't look right for my model so modified it fit. Printed in PLA

Order a print of this model

Printables

Gunpla - Runner Holder Remix

Remix of Gunpla Runner Holder to smaller sizes

Order a print of this model

Printables

Gunprimer Raser Plus Case, for Gunpla

A two part case for the Gunprimer Raser + Glass file. The lid is designed to pop on and lock by friction fit. Designed with 0.2 mm layer height in mind. Print in whatever material.

Order a print of this model