1 / 2
Extended Rewinder Shaft from GunplaMark Filament Storage 2026 — image 1
1 / 2

Extended Rewinder Shaft from GunplaMark Filament Storage 2026

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Extended the shaft by 6.25mm in either side (total length exetnded by 12.5mm). Cut length to fit your own containers.

Rating
5 / 5
Likes
10
Downloads
107
Makes
0
Views
529
Reviews
3

Updated at source:

Model information

Category
Accessories
License
GNU General Public License v2.0

The filament storage system by GunplaMark in 2026 is great. To me, the best part is the rewinder, which is a simplified version of a pre-existing rewinder. Now it uses metal as opposed to plastic springs.

If you are like me, you may not have the exact same container dimensions because you do not have the same containers. If you want to mount the rewinder in a custom-sized container, it is necessary to have longer mounting points on the ends to make sure that either end of the rewinder is supported by the walls of the container (as originally intended by GunplaMark for his own containers).

The length of the shaft is extended by 6.25mm in either direction. This means the total length is extended by 12mm. The total length of the shaft is now 95mm (used to be about 82.5mm) but the rewinder itself has the same size.

See photos:
Top: Extended model
Bottom: Original model

Tags