1 / 2
Extended Rewinder Shaft from GunplaMark Filament Storage 2026 — zdjęcie 1
1 / 2

Extended Rewinder Shaft from GunplaMark Filament Storage 2026

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Extended the shaft by 6.25mm in either side (total length exetnded by 12.5mm). Cut length to fit your own containers.

Ocena
5 / 5
Polubienia
10
Pobrania
107
Wydruki
0
Wyświetlenia
526
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
GNU General Public License v2.0

The filament storage system by GunplaMark in 2026 is great. To me, the best part is the rewinder, which is a simplified version of a pre-existing rewinder. Now it uses metal as opposed to plastic springs.

If you are like me, you may not have the exact same container dimensions because you do not have the same containers. If you want to mount the rewinder in a custom-sized container, it is necessary to have longer mounting points on the ends to make sure that either end of the rewinder is supported by the walls of the container (as originally intended by GunplaMark for his own containers).

The length of the shaft is extended by 6.25mm in either direction. This means the total length is extended by 12mm. The total length of the shaft is now 95mm (used to be about 82.5mm) but the rewinder itself has the same size.

See photos:
Top: Extended model
Bottom: Original model

Tagi