1 / 4
Mounting pins for Gunpla Display Arm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Alternate mount options for the wonderful "Gunplay Display Arm". These should add more kit compatibility.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 44
- Makes
- 0
- Views
- 462
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution
This adds several mounting options for the "Gunplay Display Arm" by GunplaMark. If you haven't checked out his make, go take a look, you'll need it to work with these.
- Some of the earlier RG kits used a very specific peg on the Action Base 2. The “Gunpla Dispaly AB2 Peg” file can be used to mount those kits.
- Some of the later RG kits used a bracket that only fits over a very specific mounting pin in the Action Base 5. The “Gunpla Display AB5 Pin” can be used to mount those kits.
- The pin in the original make was really tight, as I found it slightly to large for several kits. The “Gunpla Display AB5 Pin” should work if you're having a similar issue.
Your x and y need to be fairly accurate for these to work well. You should also print at a fairly high quality setting on your slicer to make sure the sizes come out right.
Tested with PLA on a Bambulab P1S.