CR-10 Afterburner Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A "conversion" to use the default Voron Switchwire x-gantry on a CR10 (clone) or Ender 3 Style printer.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
The conversion consists of two pieces, that each guide the x belt from the center of the extrusion (as is standard on Ender 3 style carriages) to one of the two slots on the Switchwire carriage. This allows you to use the Voron Afterburner on your printer. You quite possibly will need a new belt as mine were not long enough for the additional path but your mileage may vary.
To use this you also need the full Voron Switchwire x-carraige, two M3x40mm screws to secure the guides onto the carriage and a MGN12 rail (size depends on your printer)
On the right side piece there are two holes for mounting a BL/CR - Touch style probe.
Print the parts according to Voron spec, I used PETG as I didn't have an ABS capable machine when I made this model.