1 / 4
Qidi Xmax 2 Filament Drybox Holder Arm Remix — zdjęcie 1
1 / 4

Qidi Xmax 2 Filament Drybox Holder Arm Remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix of the holder arms to use a Sunlu drybox with an XMax 2 with a filament runout sensor.

Ocena
0 / 5
Polubienia
12
Pobrania
37
Wydruki
0
Wyświetlenia
623
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This is a remix of the drybox holder arms to work with a Qidi XMax 2 with a filament runout sensor.  It will use the original sized holder bed from the original model author without any changes. These arms include an offset to account for the XMax 2's extended back cover and lowers the holder down enough so that the filament portal in the Sunlu dryer is at the correct height for a straight feed into the runout sensor.  

As this is a very large print, I have broken it into 3 parts that can be glued together to support the drybox.  They will fit on the 300x250 XMax 2 bed and can be printed simultaneously. The connection posts are tight and can be joined together after some light sanding to reduce the size slightly. I used minimal supports to support the bottom of the connection posts. 

I printed this at a 0.2 layer height with 20% infill.

Tagi