Screw-Lid 26650 Battery Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Robust and durable case for your 26650 batteries!
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 154
- Wydruki
- 1
- Wyświetlenia
- 1076
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You can buy these from me here!
Consider supporting us on Patreon!
These 26650 battery holders with a screw lid are incredibly tough and rigid!
Designed for use with unprotected button top and flat top cells.
Print the bodies out of PETG and the flexible strap out of 95A TPU.
Flexible TPU bumpers can be stacked in the bottom of the battery holder in order to reduce noise from rattling batteries. Bumpers can easily be removed using a small flat head screwdriver.
I used PETG from California Filament and TPU from Matterhackers.
The main body of the battery holder is printed using a 0.6mm nozzle with a 0.2mm layer height. The lid, strap retainer, and strap are printed using a 0.4mm nozzle and 0.2mm layer height.