Liczymy pasujące modele…
This is a battery powered, rechargeable, Raspberry pi based RCM payload for the Nintendo Switch. The enclosure is made so that it can be battery powered and recharged with a built in USB micro b port. The payload can be injected into the…
Wydruk około 4,66 €–5,70 € nettoWstępna wycena jednego wariantu
Charged batteries have the positive pole facing up, empty batteries have the negative pole facing up. With this you can know the state of the each battery.
I added files for the organizer without the adapters as I don't actually need C and D size batteries in this day and age lol.
Charged batteries have the positive pole facing up, empty batteries have the negative pole facing up. With this you can know the state of the each battery.
I kept losing track of which of my rechargeable batteries were dead and which ones were freshly charged. Threw together a simple organizer with printable icons, can be printed with minimal supports. Print the icons at 100% scale for a…
I added files for the organizer without the adapters as I don't actually need C and D size batteries in this day and age lol.
We have several of the PowerPaw 501 hand warmers from Costco (for kids sports games, etc), and got tired of having a pile of them rolling around and disorganized on the counter when not in use, and charging. Ryan's flashlight holder model…
📖 Instructions 📦 Bottango Project files 💾 Bottango Driver Parts used: ESP32 WROOM 32D ESP32 Expansion Board 30P DEVKIT V1 OLED 1,5 Zoll Display 128x128 Pixel SH1107 FM5324GA (Battery management, still testing, maybe not final) Lithium Ion…
It’s the attachment nozzle of the Bosch (Rechargeable vacuum cleaner MOVE 2in1 BBHMOVE5N) handheld vacuum — the little piece you clip onto the mini‑vac to focus the airflow. Used for: - getting into tight spaces (corners, sofa creases,…
I wanted to test some pouch cells to better understand their capacity. You could charge your pouch batteries via 18650 charger, test pouch batteries, or (given the room) run an 18650 compartment with a pouch Li-Ion. These are the end…
A warning first: This project involves using lithium ion pouch cells, which is one of the most dangerous types of batteries available. They are easy to physically damage with anything sharp or pointy. If the bag is pierced it will most…
Simple gridfinity 3x5 bin to securely place a Zanflare C4 battery charger. Design has channels to help air vent from the underside. Cutouts in the back for the plug and for the USB A connector. Please rate, post makes and like my models.
This is the insert only, for rechargeable batteries. Refer to the original model for printing the box.
Holds this well reviewed rechargeable Hotfien air duster from Amazon in a 2x2 Gridfinity frame.
AAA battery dispensers for rechargeable battery. One marked "Full" the other marked "Used". Text can be painted or
I recommend printing it in ABS for greater durability
RECHARGEABLE AND ECO-FRIENDLY SOLAR LIGHT,USED FOR EMERGENCY. RECHARGEABLE AND ECO-FRIENDLY SOLAR LIGHT FOR EMERGENCY. MATERIALS: 1 SOLAR PANEL 5V 500mAh 2 li-ion battery 3,7v 2000mA 1 PCB FOR RECHARGED LI-ION BATTERY 1 INTERRUPT 1 LED…
Gridfinity Holder for the VARTA Rechargeable Battery Plug Holds: VARTA Plug 14x AA Battery 11x AAA Battery Version With Logo and without Logo Please share your Makes, give a thumbs up if you liked it or let me know what i can improve <3
1x4 Gridfinity block with space for 3 ‘bundled’ batteries for Xbox One controllers, and the charger they came with. This was designed for the one I have, a Beboncool branded one (no longer available), but should just be one of the generic…
This stocker can hold 12 AA (LR6) rechargeable batteries. Batteries that have been charged are stored from the top and taken out from the bottom for proper battery circulation. All parts do not need support. The lid can also be printed…
Skil SD561201 Rechargable Screwdriver charging stand with 48 slots
Charged batteries have the positive pole facing up, empty batteries have the negative pole facing up. With this you can know the state of the each battery.
I just adapted the candles a little bit so my rechargeable tea candles from Amazon (…
It is designed for gravity drop of the batteries when taking one from the bottom. Dimmensions are: 120x91x230.33mm (LxWxH) It is for organizing AA (x16) and AAA (x24). Language is spanish tough. on the back, it has a space designed to…
The Kaiweets HT112B multimeter has a parasitic battery drain problem when it's off. I modified it to run off a rechargeable lipo battery so that it can be easily recharged instead of having to change the coin batteries. Designed to be…
Case for LiPo battery including Adafruit Powerboost 1000C. You will need: 3.7v 8000mAh LiPo Battery Adafruit Powerboost 1000C Simple SPDT power switch 4 x M3 x 10mm bolt 4 x M3 nut 4 x M2 x 4mm bolt 24AWG wire The Powerboost will be…
Oral-B rechargeable toothbrush holder. Designed to hold: -1 Charging Base -3 Brush Heads -3 electric toothbrushes -Tube Of Toothpaste Also available on MakersWorld: Oral-B Rechargeable Toothbrush Holder x3 Remixed by rafez - MakerWorld
VESSEL Ballgrip Rechargeable Screwdriver Cordless No.220USB-1U and several bits Gridfinity base.
A simple to make, snap together, low cost tool to save time swapping line on your fishing reels. I printed at .2 layers and 15% infill with a brim, any filament will work fine. Schematic included for lithium ion battery and charger module…
Allows you to separate discharged batteries from charged ones without mixing them. Required material : printed part x1. Using PLA as a printing material , the strength of the product is enough to fulfill its function.
Warning: Use at your own risk. LiIon batteries are potentially dangerous, if handled improperly. Do not use or charge unattended. Not safe for children. Use the protection cap to prevent short circuits. I needed a fischertechnik…
Perfect for stashing just enough juice when the grid goes silent and the troublemakers are lurking in the shadows. This model is scaled to the Rust base diorama model.
This is a LiPo recharge pack I made to power my fume extractor. http://www.thingiverse.com/thing:69729 Components: 1 - Printed box 2 - Printed snap fit lid 3 - LiPo charge board - TP4056 4 - LiPo Battery 5 - Buck step up to 18V to drive…
I designed a simple, dimmable, rechargeable table lamp, with alternative design possibilities, based on the Qeemy LED Night Lights, that can be bought, e.g. from amazon:…
Meant to be stuck to a wall with tape
This project i made when i realized, I need a power full video light. I used 12 volt led and 18560 3 liion batteries
…Marre de payer une fortune pour des filtres à charbon actif à mettre dans la fontaine à eau ? Voici le modèle qu'il vous faut ! ^^ → Démonstration en vidéo J'achète le charbon actif en sachet de 1 litre ( ici ). J'ai de quoi renouveler…
3D Printed case to mount around the iCOMM so it can use a rechargeable battery that can easily be switch out. Build thread and how to can be found here https://www.whitearmor.net/forum/topic/53962-icomm-mount/
Headlamp holder for common 8 mode 1200 lumen usb rechargeable headlamps
This is a storage bin for the Coast PX15R flashlight which holds the main unit, the included 18650 form factor USB-C rechargeable battery, a USB cable, and the included AAA battery adapter. I was annoyed at having to stow the different…
A swivel base adapter using rechargeable, motion-sensor LED lamp (Amazon) or now here (eBay) for use with Solar System Lithophane Planet Lamp Collection-205 by FritzPeppone . Make your globe portable and/or motion activated. LED lamp is…
LG BL-48TH Rechargeable Li-ion Battery 3.8 V Model
Oral-B rechargeable toothbrush holder. Designed to hold: -1 Charging Base -3 Brush Heads -4 electric toothbrushes -Tube Of Toothpaste Also available on MakersWorld:…
Battery case for surefire 18650 with onboard recharging. Normal 18650 will fit with space on the end. O-ring AS658-019 1/16" x 3/4" (Same O-ring as P6 tail). Case was designed to minimize size/diameter. Wall is thin in threaded area.…
Printable without supports Real Measurements 18x630mm (2mm as space for the metal washer) You can glue the washer or use a screw (3,8mm screw hole) Feel free to edit the thicknes and height to you needs, *.f3d is included.
The description of this light fixture on Amazon is “Under Cabinet Lights, Quntis 54 LED Rechargeable Battery Operated Motion Sensor Light Indoor,2200mAh Magnetic Dimmable Closet Lights, Wireless Under Counter Lights for Kitchen, Wardrobe,…
ventilateur rechargeable impression facile sans support (attention à l'orientation des pièces) moteur basique à insérer en force dans le corp petite modif sur la connectique et rafraichissement la pièce cube 33 est à modifié pour bloqué…
Parts list: MT3608 TP4056 12v beverage Pump (Crocsee) 18650 Lithium Ion Battery Tactile Switch on custom PCB Silicone Tube Food Grade Flexible Hose 8mm (ID) x 11mm (OD) Belt Clip…
Features A sleek, adjustable LED desk lamp based on Volan's LED lamp design , powered by a rechargeable Lithium-ion 18650 battery Ideal for hobbies or working on fiddly electronics Gets 3 hours of battery life from a 3000mAh cell…
Necessary equipment : 10mm 5M Belt Brushless motor (with reducer) 6 608zz bearings 3.3V leds M3 heat set inserts M3 screws You will need to print every part excluding axe_V1.stl. You may need to modify the structure.stl and axe_V2.stl…
Wall mount for the rechargeable screwdriver sold here: https://share.temu.com/LWVvvkOgH1A NOTE: Hang it with a double sided tape and also close the top section, do a variable layer height and set the top 3mm section to 0.2mm or slice the…
We got a set of the WILLED USB Rechargeable RGB LED Spotlights for our daughter, for decorating blanket forts and whatnot. But they're sometimes a bit too bright & directional, so made this simple diffuser for them. The one in the photos…
Tire cap nut for rechargeable mini saw Procraft PKA-18Li (2012186728). the cap nut broke and i re-build a model of it. at the moment i will get back the mini saw i will check it.
这是一个极简的旋转展示台，可调速可充电，您可以使用它来旋转您的 3d 零件以增强观看效果或者用来拍摄。 Remix from https://www.thingiverse.com/thing:5213801 设计原则是以最低成本来实现这个展示台，你需要这些东西： 硬件部分： 1-所有需要打印的.STL文件 2-N20减速电机一个 3-带micro usb充电头的2000mah 7.4V锂电池（可替换成其他3-12v以内的锂电池） 4-四个608zz滚珠轴承…
All instructions on my Instructable post : https://www.instructables.com/Yet-Another-DIY-Maglite-USB-Rechargeable-18650-Cel/ After looking online for a solution to upgrade my MagLite, i found this post…
I kept losing track of which of my rechargeable batteries were dead and which ones were freshly charged. Threw together a simple organizer with printable icons, can be printed with minimal supports. Print the icons at 100% scale for a…
I needed a single storage tray to organize my lithium rechargeable batteries. The tray stores 9 lithium 14500 batteries and 8 lithium 18650 batteries. Inspired by @MJ_230962 AAA/AA battery trays.
I needed a storage tray to organize my rechargeable batteries. This one holds 8 AAA, 12 AA and 2 9V batteries. A remix of my other model for holding lithium rechargeables
Poignée permettant d'utiliser un rouge à lèvres Clarins rechargeable sans l'écrin. Imprimé sur Bambu A1 Mini avec Bambu PLA Basic Blanc, process 0.08mm High Quality. Ce modèle n'a aucun lien avec la marque Clarins. --- Handle for using a…
A rechargeable 18650 battery pack forms the core of this set of lighted display stands. The battery pack could definitely be used for other projects too. The first configuration uses various arrangements of lights that are embedded in the…
This is a three-part shell that houses four 18650 cells that will source 7.2 to 8.4 volts with double capacity being that two sets of the cells are in parallel. Using 1-1/2AH cells yield 3AH battery, 2AH cells yield 4AH. Caution: Since it…
This started with joule thief designs I have been working on. It then mutated into this because I work for a battery company, and we are encouraged in experimentation. It uses an over the counter, USB, single cell BMS board for charging…
Bicycle Cupholder W/ Detachable Bluetooth Speaker Designed to fit Yeti style cup or larger drinking bottle. Bluetooth speaker can be detached with perforated lock-ring to re-charge or to carry on the go. Perforated lock-ring allows sound…
I made this to keep everything together in one place. The cable holder is 9 X 16mm, the block holder is 24 X 38mm, and the battery diameter is 33.5mm but all sizes are a little less due to plastic shrinkage. It stands 30mm high. Very…
⚠ DİKKAT 2.5" HDD MOTORU ZIMPARA İŞLEMİ İÇİN ÇOK GÜÇSÜZ OLUYOR SADECE ÇOK HAFİF ZIMPARALAMA İŞLEMLERİNDE KULLANILABİLİR. 📦 İçerik: Tamamen 3D yazıcıyla üretilebilen gövde parçaları Eski bir 2.5" HDD motorunu değerlendiren kompakt tasarım…
This is a rechargeable base with LED light for the ⌀75mm Lithophane Moon/Planet lamps by FritzPeppone . It can be recharged on any standard USB-C charger in a bit less than 3 hours. (No fast charge on that one, sorry. If you find a module…
A clone of https://he.aliexpress.com/item/1005006828275284.html For $5USD you can buy it instead. But I rather like this one. BOM Heater - https://he.aliexpress.com/item/1005006954619853.html Plug Socket -…
This project is a smart Wi-Fi thermometer powered by a 21700 lithium battery (5 Ah) and recharged via USB-C . It’s designed to offer very long battery life , easy assembly, and low cost — with no need for programming, only a few simple…
3.2V 32Ah Lifepo4 Rechargeable Battery - MODEL3.2V 32Ah Lifepo4 Rechargeable Battery - MODEL
Use to for bracket to fit joyo5 Use lock to hold in place (Print lock in TPU, adjust length as needed))
Since I hate to throw away tools that generally work but could do with some enhancement, I've converted an old Bosch NiCd battery drill to use Li-Ion batteries. I found different models for the battery case that all had some issues and…
Bu DIY projede, şarjlı ve taşınabilir bir gravür motoru (mini Dremel alternatifi) tasarladık. Gövdeyi 3D baskı ile ürettik ve motor, batarya, şarj devresi gibi kolay bulunabilen elektronik parçaları kullandık. Yapım süreci sırasında…
This is my first real electronics build with no prior CAD or wiring experience, so it took a lot of trial, error, and effort. Everything you need to print, assemble, and light up is right here. Assembly Just print the parts and put it…
Description This part attaches to your LED Work light to allow it to be attached to a camera tripod. Designed for Berg 10W Work light , a rebranded generic Made in China model. The following should also fit: Emos P4533 Megatron Helfa M…
EDIT: Based on user feedback, I added a version with more tolerances on the hinges. Video on Vimeo: https://vimeo.com/687168699 A battery case for either 4x AAA (+1 AA) or 4x AA batteries! The case has a hinge on the back so the material…
This is a pretty straightforward 2x6 Gridfinity bin for storing the Hardell 6" calipers. The only downside to this model is that you can't stack more bins on top of it. However, I'm including the original CAD file in case anyone happens…
This nozzle is designed as a replacement part for rechargeable vacuum pumps used with vacuum storage bags commonly used for filament. The original seal on my pump cracked, making it useless. Rather than disposing of a perfectly good pump,…
There is a version with a flat mounting plate for screwing or gluing. This is intended for lighting the interior, trunk, or helmet compartment of vehicles (no photos). And there is a special version for 50 mm diameter tubes for gluing.…
This nozzle is designed as a replacement part for rechargeable vacuum pumps used with vacuum storage bags commonly used for filament. The original seal on my pump cracked, making it useless. Rather than disposing of a perfectly good pump,…
This small solar system setup allows for the recharging of a 3.7V 500mAH lithium battery. During the day the LDR (photoresistor) has low resistance, pulling the transistor base low—keeping it off. In darkness, the LDR’s resistance…
Rechargeable Battery Case for Xiaomi Temperature & Humidity Monitor (and Clones) 🇬🇧 Assembly Instructions (EN) Required parts: Battery — maximum length 42 mm. TP4056 charging module — charging current must be adjusted according to the…
This is a compact case designed specifically for the HP Slim Rechargeable Pen Charger M89938-001. It protects the charger from dust and damage and keeps everything neatly organized. The model is easy to print. Assembly guide: Slide the…
This is a case I created for the logic analyzer designed by gusmanb on github. ( https://github.com/gusmanb/logicanalyzer ). I use the version 6.0 PCB ordered from PCBWay. I extended it to be battery powered using a lipo cell. I used the…
I grabbed a Insignia 32" Fire TV for Free from Facebook Marketplace. It didn't come with a Wall Mount & the Remote used AAA batteries. So, I added a 3D Printed Wall Mount & upgraded the remote with Li Ion Rechargeable Battery. Initially I…
🛠Parts: TP4056 USB-C Li-Ion charger Vape reciklated batteries Switch ( http://elfax.cz/223%7C226%7C.d.F11200.prepinac-posuvny-mini-2p1-mensi-.html ) 2 x 10 Ω Resistors 3W LED Nutella bottle ⚡Schema: I glued everything with hot glue gun.…
这是一个极简的磁力搅拌台，可调速可充电，您可以使用它来搅拌各种液体。 设计原则是以最低成本来实现这个展示台，你需要这些东西： 硬件部分： 1-所有需要打印的.STL文件 2-从CDROM拆下来的小电机一个 3-带micro usb充电头的2000mah 7.4V锂电池（可替换成其他3-12v以内的锂电池） 4-PWM直流电机调速器1803BK 一个 ( https://m.tb.cn/h.fO5H4wx?tk=Mk1m2WgwUjy )…
ANKO Rechargeable handheld Scrubber attachment. Create you own custom work heads for this awesome tool 'eg polish, or scotch bright'. Print in PLA 5 walls, 15 % infill.
A simple case for the HP Wireless Rechargeable USI Pen and it's accessories. The cap is a pretty tight fit, and the nib holders need to be reamed out a bit, but other than that it works well enough for me. I've included the FreeCAD files…
I made these bins to be able to organize my flashlights drawer. There are 3 models: one for the Braun 500 lumens rechargeable folding light (Item No. 59536), another one for the Icon Dual sided 1,000 lumen rechargeable work light (item…
We have several of the PowerPaw 501 hand warmers from Costco (for kids sports games, etc), and got tired of having a pile of them rolling around and disorganized on the counter when not in use, and charging. Ryan's flashlight holder model…
This is a small simple storage/dispenser for rechargeable AA batteries. It has a compartment for empty batteries, another for fully charged batteries, and another for the charger. Holds 7 empty AA batteries (can stack a few more on top)…
I decided to create my own rechargeable electric screwdriver as I did not like the existing models on the internet or in stores. This one features a battery protection circuit, sliding actuator, a 4.4Wh battery, and a 1:200 reductor…
📖 Instructions 📦 Bottango Project files 💾 Bottango Driver Parts used: ESP32 WROOM 32D ESP32 Expansion Board 30P DEVKIT V1 OLED 1,5 Zoll Display 128x128 Pixel SH1107 FM5324GA (Battery management, still testing, maybe not final) Lithium Ion…
