Expansion Cheeks for 4U Intellijel Palettes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Squeeze a few more HP out of your palette and give it a pop of color!
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 423
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
Expansion Cheeks for your Intellijel 4U palette (should work for 62 or 104 HP models).
You'll need to print the cheeks desired, source 10x M4 screws of the correct length (80mm for 14HP, 50mm for 9HP), and either square nuts or threaded inserts for the additional space. You'll reuse the 4 locking nuts from the palette.
The only major caveat here is that there is a bit of a lip at the phyical end of the original palette chassis – so very deep modules won't be able to span across. Less deep modules will have no problems.
If you would like any other custom HP lengths, let me know. 80mm M4 screws (14 HP cheeks) were the longest yet easy to source option (amazon). 50mm M4 screws (9 HP cheeks) were the longest I could source at my local HW store.