1 / 1
Gear Cover for Rev ION 2 Motor Drivetrain Gearbox — zdjęcie 1

Gear Cover for Rev ION 2 Motor Drivetrain Gearbox

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3d printed cover for Rev ION gearbox

Ocena
0 / 5
Polubienia
3
Pobrania
20
Wydruki
0
Wyświetlenia
250
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

This is a gearbox cover for the Rev ION 2 Motor Drivetrain Gearbox - Through Bore to slightly protect the gears and protect things like hands and wires from getting chewed up by the gearbox. It attaches to the two free mounting holes on the NEO motors. To mount either disassemble the gearbox and place the cover on after everything except the outer plate. An easier way to mount is to slightly stretch the cover over the bottom spacers (it should sort of snap in place). Feel free to modify!

Tagi