Snatch Block Pulley with Badge Tether Attachment Block.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small snatch block for various light uses. Badge Tether block for 2020 extrusions.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 483
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I wanted a smoothly rolling pulley for my ubmillical… so now I have one. I modeled this to use an old belt pulley wheel from the tronxy x5s that I have since torn down. Print 2, supports will be needed. Use an m5x24 bolt with a nylon lock nut. (Make sure not to tighten it too much or it won't roll very easily.) Assemble as shown in the picture. I used a zip-tie to attach the small end to the triangle on my badge holder.
Also including a block to attach the badge tether to the 2020 extrusion. This part uses an M3 screw and hammer head t-nut.