Snatch Block Pulley with Badge Tether Attachment Block.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small snatch block for various light uses. Badge Tether block for 2020 extrusions.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 29
- Makes
- 0
- Views
- 483
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I wanted a smoothly rolling pulley for my ubmillical… so now I have one. I modeled this to use an old belt pulley wheel from the tronxy x5s that I have since torn down. Print 2, supports will be needed. Use an m5x24 bolt with a nylon lock nut. (Make sure not to tighten it too much or it won't roll very easily.) Assemble as shown in the picture. I used a zip-tie to attach the small end to the triangle on my badge holder.
Also including a block to attach the badge tether to the 2020 extrusion. This part uses an M3 screw and hammer head t-nut.