Microphone mount to microphone mount coupler (5/8" to 5/8")
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Coupler to join a microphone mount to a same sized mount. I'm using it for a USB Microscope
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 401
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently purchased a USB microscope that came with an arm attached to a small base. This does not suit my purposes, but I noticed that the focusing arm mount “bolt” was the same size as my microphone mount. So, I whipped this up quick from my “Microphone to Camera” mount.
It's really nice now working on electronics where I can move the microscope to just where I need it on a boom arm!
Printed in ABS and attached using 4x 4x8mm bolts, washers, and nuts. The hold is very firm, but I can still rotate the camera slightly if needed.