Aloy of the Nora (hollow and solid remix for SLA)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to try out my new Anycubic Photon and had free space on my buildplate. So i've used this Model scaled down.…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 406
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
I wanted to try out my new Anycubic Photon and had free space on my buildplate. So i've used this Model scaled down.
Resin isn't that cheap, so i make it hollow :)
Remixed from https://www.thingiverse.com/thing:2472593
Print Settings
Printer Brand:
Anycubic
Printer:
Photon
Rafts:
No
Supports:
Yes
Resolution:
0.05
Infill:
100%(SLA)
Notes:
Scaled to 65% in my example.
Used Resin: Anycubic UV Resin Basic - Green
Exposure: 10s
OffTime: 6.5s
Bottom Exposure Time: 50s
Bottom Layers: 8
Post-Printing
WEAR GLOVES!
- Submerged in ethanol for ~10-15 minutes and let it dry.
- Removed Supports (not shure i had to do this after curing)
- Post cured in direct sunlight.
How I Designed This
Basically very simple.
I opened it up on Meshmixer
- used edit -> Solid with a high accuracy
- edit -> Hollow
Here i played with the offset (wall thickness) so i've got a channel through both feet from the Baseplate to the head.
I've added two holes to prevent the suction-cup effect.
Category: Sculptures