Aloy of the Nora (hollow and solid remix for SLA)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to try out my new Anycubic Photon and had free space on my buildplate. So i've used this Model scaled down.…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 58
- Makes
- 0
- Views
- 406
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution
I wanted to try out my new Anycubic Photon and had free space on my buildplate. So i've used this Model scaled down.
Resin isn't that cheap, so i make it hollow :)
Remixed from https://www.thingiverse.com/thing:2472593
Print Settings
Printer Brand:
Anycubic
Printer:
Photon
Rafts:
No
Supports:
Yes
Resolution:
0.05
Infill:
100%(SLA)
Notes:
Scaled to 65% in my example.
Used Resin: Anycubic UV Resin Basic - Green
Exposure: 10s
OffTime: 6.5s
Bottom Exposure Time: 50s
Bottom Layers: 8
Post-Printing
WEAR GLOVES!
- Submerged in ethanol for ~10-15 minutes and let it dry.
- Removed Supports (not shure i had to do this after curing)
- Post cured in direct sunlight.
How I Designed This
Basically very simple.
I opened it up on Meshmixer
- used edit -> Solid with a high accuracy
- edit -> Hollow
Here i played with the offset (wall thickness) so i've got a channel through both feet from the Baseplate to the head.
I've added two holes to prevent the suction-cup effect.
Category: Sculptures