1 / 5
NISI rail indicator — zdjęcie 1
1 / 5

NISI rail indicator

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Snap on indicator for the NISI macro rail for more precise indexing.

Ocena
0 / 5
Polubienia
1
Pobrania
24
Wydruki
0
Wyświetlenia
272
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a snap on indicator for the NiSi Macro Focusing Rail NM-180 for more precise indexing. Three variations are included. The “NISI_indicator_for_pin” will take a #24 T-pin that is pushed in and then cut with wire cutters. It will also accept mini pins if you use a drop of glue. The "NISI_indicator_with_slot" will center any small wire or other pointer material you would like to use so you can glue it in place. The NISI_indicator_pointer requires no additional material but due to printer tolerances you will not have as sharp a point as the others. You can also bend the pin down slightly and it will ‘click’ into the knurling of the knob at the end of the rail for a very positive indexing feel.

Print with end opposite pointer down on bed. No supports needed. Enjoy!

Tagi