1 / 5
NISI rail indicator — image 1
1 / 5

NISI rail indicator

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Snap on indicator for the NISI macro rail for more precise indexing.

Rating
0 / 5
Likes
1
Downloads
24
Makes
0
Views
272
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a snap on indicator for the NiSi Macro Focusing Rail NM-180 for more precise indexing. Three variations are included. The “NISI_indicator_for_pin” will take a #24 T-pin that is pushed in and then cut with wire cutters. It will also accept mini pins if you use a drop of glue. The "NISI_indicator_with_slot" will center any small wire or other pointer material you would like to use so you can glue it in place. The NISI_indicator_pointer requires no additional material but due to printer tolerances you will not have as sharp a point as the others. You can also bend the pin down slightly and it will ‘click’ into the knurling of the knob at the end of the rail for a very positive indexing feel.

Print with end opposite pointer down on bed. No supports needed. Enjoy!

Tags