Fast Polymaker/Duramic AMS ring with 2 tabs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thinner ring for better fit in AMS, smaller tabs for easier fit. Should be perfect!
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 493
- Wydruki
- 5
- Wyświetlenia
- 1619
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I was using JamKo76's Polymaker rings, but the nub/tab was always hard to push in, and the rings were a little too thick to roll smoothly in my AMS. So I trimmed 0.4mm from the base of the ring to make it fit better without affecting the part that clips onto the cardboard spool. I also changed the nub/tab a little, made it smaller (my Polymaker spool's hole measures 4.1mm, so I made the nub 3.8mm).
PS: These rings work great for Duramic spools too!
Let me know how it works for you!
Printing instructions
Set infills all to concentric, and on the X1C, it's a sub 10 min print.
