Fast Polymaker/Duramic AMS ring with 2 tabs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Thinner ring for better fit in AMS, smaller tabs for easier fit. Should be perfect!
- Rating
- 5 / 5
- Likes
- 46
- Downloads
- 493
- Makes
- 5
- Views
- 1,619
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I was using JamKo76's Polymaker rings, but the nub/tab was always hard to push in, and the rings were a little too thick to roll smoothly in my AMS. So I trimmed 0.4mm from the base of the ring to make it fit better without affecting the part that clips onto the cardboard spool. I also changed the nub/tab a little, made it smaller (my Polymaker spool's hole measures 4.1mm, so I made the nub 3.8mm).
PS: These rings work great for Duramic spools too!
Let me know how it works for you!
Printing instructions
Set infills all to concentric, and on the X1C, it's a sub 10 min print.
