Bambu Labs Splined Spool (and ReSpooling spool)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The hex versions required too much filament and were a long print. I shortened it by putting a few “splines”.
- Ocena
- 4,615 / 5
- Polubienia
- 115
- Pobrania
- 889
- Wydruki
- 16
- Wyświetlenia
- 3304
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Wanted to reduce the amount of filament used compared to the hex version. wanted to be able to see the amount of filament remaining, a space for the filament sticker, and an “attractive“ design, something a little different.
managed to print both pieces in a little over 3 hours on standard mode. Can be done in ludacris mode in around 2 hours (but don’t quote me on this lol)
One 3MF file contains both halves
Use the ‘BambuSpool-Splined(Refill)“ for BambuLabs refill filament and use “ReSpooling Spool“ if you went to respool another spool so it can work with the AMS