Bambu Labs Splined Spool (and ReSpooling spool)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The hex versions required too much filament and were a long print. I shortened it by putting a few “splines”.
- Rating
- 4.615 / 5
- Likes
- 115
- Downloads
- 889
- Makes
- 16
- Views
- 3,304
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Wanted to reduce the amount of filament used compared to the hex version. wanted to be able to see the amount of filament remaining, a space for the filament sticker, and an “attractive“ design, something a little different.
managed to print both pieces in a little over 3 hours on standard mode. Can be done in ludacris mode in around 2 hours (but don’t quote me on this lol)
One 3MF file contains both halves
Use the ‘BambuSpool-Splined(Refill)“ for BambuLabs refill filament and use “ReSpooling Spool“ if you went to respool another spool so it can work with the AMS