Low Profile Stand for Blue Snowball
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An ultra low profile stand for the Blue Snowball microphone.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 391
- Wydruki
- 6
- Wyświetlenia
- 1316
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An ultra low profile stand for the Blue Snowball stand.
5/8"-27 mount for the mic.
Just enough clearance to fully tilt the microphone on the screw.
70mm diameter base ensures the microphone won't tip or roll while still being a small footprint and low profile on your desk. Like a sturdy shadow.
Reupload because I accidentally deleted the previous upload (lol).
Print Settings
Printer:
Ultimaker 2+
Rafts:
No
Supports:
No
Resolution:
0.06mm (As fine as you can for thread accuracy)
Recommend you use a fine resolution to ensure the threads are printed accurately as the screw is 5/8"-27.
Infill:
10% infill is fine. 20% will make it slightly stronger if you want.
Filament: unknown PLA Blue, Black (recommended you print in a colour that matches your microphone).
Printed at my local library so filament brand is unknown, but any PLA should be fine.
Overall print weight should be ~8g.
Post-Printing
Paint
Taped off the screw and painted the base black to match the microphone.
2 coats of acrylic matte black.
Category: Audio