Low Profile Stand for Blue Snowball
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An ultra low profile stand for the Blue Snowball microphone.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 392
- Makes
- 6
- Views
- 1,321
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An ultra low profile stand for the Blue Snowball stand.
5/8"-27 mount for the mic.
Just enough clearance to fully tilt the microphone on the screw.
70mm diameter base ensures the microphone won't tip or roll while still being a small footprint and low profile on your desk. Like a sturdy shadow.
Reupload because I accidentally deleted the previous upload (lol).
Print Settings
Printer:
Ultimaker 2+
Rafts:
No
Supports:
No
Resolution:
0.06mm (As fine as you can for thread accuracy)
Recommend you use a fine resolution to ensure the threads are printed accurately as the screw is 5/8"-27.
Infill:
10% infill is fine. 20% will make it slightly stronger if you want.
Filament: unknown PLA Blue, Black (recommended you print in a colour that matches your microphone).
Printed at my local library so filament brand is unknown, but any PLA should be fine.
Overall print weight should be ~8g.
Post-Printing
Paint
Taped off the screw and painted the base black to match the microphone.
2 coats of acrylic matte black.
Category: Audio