2× 30mm arcade button box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimal box for 2× 30mm arcade buttons, specifically sized for the Swerry Button for Cherry mechanical keyboard switches
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 1229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Minimal symmetrical box for 30mm arcade buttons, specifically the Swerry Button for Cherry mechanical keyboard switches, but theoretically should work with any 30mm arcade buttons; just check the total depth.
The photo of the black print is the 20mm-height box, the red print is the 30mm-height box.
My toddler is super into pretend play, and I thought some buttons would help her imagination with pretending to be in elevators, flying a plane, or whatever she can think up!
Print top-down—unless you want an ironed top, then print top-up with supports.
20% cubic infill is what I went with, your mileage may vary.
Made in Tinkercad; edit/remix/adapt it online.