Yamaha Compatible Vintage Snare Bridge (9000, Recording, Tour, Stage)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for the plastic snare bridge on early-'80s Yamaha-compatible snare drums (9000, Recording, Tour, Stage).
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 470
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Public Domain
A replication of the vintage plastic snare bridge found on Yamaha-compatible drums from the early '80s. Modeled in Fusion 360 and made to spec from the original part.
Fits: Yamaha-compatible 9000/Recording Custom, 8000, Tour and Stage series snare drums from the early '80s, and similar vintage snares.
Files:
- ysb01r.stl: snare bridge
- ysb01r.step: STEP version, if you want to adjust the model
Recommended material: PETG.
Printing: use supports for the inside of the shaft and to hold up the back of the part in its saved orientation. Tune your support settings so the supports come out of the inside shaft; pliers and a metal punch help.
Mounting holes: 27.2 mm apart, center to center (see the hole-spacing image).
Check the fit: compare the hole spacing image with your drum before printing.
Don't have a printer? Printed versions are available at drumstash.com