1 / 1
Crossbow bolt fletching for 1/2" shaft - spiralize/vase mode — zdjęcie 1

Crossbow bolt fletching for 1/2" shaft - spiralize/vase mode

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I wanted to fletch some heavy 1/2" diameter crossbow bolts of approximate medieval design.

Ocena
0 / 5
Polubienia
60
Pobrania
360
Wydruki
0
Wyświetlenia
1541
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I wanted to fletch some heavy 1/2" diameter crossbow bolts of approximate medieval design.
Having no goose feathers on hand, I figured a 3d printed one could be a decent alternative.
Upon searching I found a cool idea by Tal84: https://www.thingiverse.com/thing:3650087 and designed my own version for a crossbow, where only two flights are used. I put a 3.6° twist into the design, as the heavy bolt will be going slower and intuitively I think a more aggressive twist will generate better spin for accuracy.
The stl is solid, in order for it to work it needs to be printed with "spiralize outer contour" in cura, or "vase mode" in some other slicers.

Tagi