32 modeli
OpenSCAD Fletching jig If you have any suggestions, leave them in the comments or open an issue on GitHub Overview Simple yet effective fletching jig that will adjust to all your needs. Intended to provide new archers with access to 3D…
Designed from scratch with thinner vanes and a 3" deep hole to fit a 5/16" wood dowel (Home Depot). Vane is about 3 3/4" long. I recommend increasing printing flow to 102% as I've experienced a bit of underextruding. I recommend attaching…
Easy to use fletching jig! Insert your arrow with its nock in the tube trace the lines qith a pen, and you are ready to fletch your spiral vanes. Note: two models available one for small diameter arrow (ie: skylon paragon…) and another…
Fletching Jig for 3 vane arrows. I need a true helical jig and wanted it to be small enough to pack away. Uploading full Fusion 360 file for you to play with parameters (in images). I have added files for 4" vanes, 0.2875" shaft, 4 deg…
Why? This is a small tool made for sliding onto your arrows so you can use a mechanical pencil or marker to draw lines for attaching stick-on type fletchings, such as XSWings, Spin Vanes, Spinwings etc. Parametric There are two example…
I wanted to fletch some heavy 1/2" diameter crossbow bolts of approximate medieval design. Having no goose feathers on hand, I figured a 3d printed one could be a decent alternative. Upon searching I found a cool idea by Tal84:…
Fletching jig for original Ek Archery 7.5" Adder Crossbow Bolts by Joerg Sprave (2 Vanes). Print: 1x Base 1x Arm_A (or Arm_A_0.3_Offset) 1x Arm_B (or Arm_B_0.3_Offset) 2x Lever Parts needed: 3x M3x30mm Screw FH 3x M3 Nut (recommended…
This is a mostly 3d printed fletching tool. Suitable for fletching arrows with 3 fletches. The frame is based on 20mm by 1.85mm flat Aluminum stock from the hardware store. The spacing between components can be adjusted to suite your use…
I couldn't find any individual fletching models anywhere so I decided to design my own. Can be glued to an arrow using super glue or fletching tape. I have NOT tested it yet. Print Settings Printer: Ender 3 Rafts: No Supports: No…
Fletching that fits a 7.9mm (5/16") rod perfectly. Vanes are slightly (2 degrees) angled for speed and accuracy increase. Works great - have been tested. Print Settings Printer: Ender 3 Rafts: Yes Supports: No Resolution: 0.2mm Infill:…
A nice little tool to help you mark the position of your 3 arrows, at 120 degrees from each other. There is a nocking point within, so that your cock feather is perfectly 90 degrees from your string! Fits shafts up to 9mm diameter, and 4"…
Remix of the brilliant design by @ShionS_271443 to whom go all credits for the excellent work. This remix allows the jig to be used with arrows fitted with pin nocks. The pin snugly fits inside the opening at the bottom so that the arrow…
Für Schäfte von 4,5 bis 8mm Außendurchmesser Man benötigt die base, eine cap mit dem Außendurchmesser des Schafts (nächste Größe) und drei Inserts mit dem gewünschten Winkel (0°, 1°, 1,5° oder 2°) Der Bajonettverschluss funktioniert am…
UPDATE okt. 30 2025: Added a updated 120°-version AND a 90°-version, as requested by hart_3831848 Seperate items! ************************************ I learned that the original Bitzenburger Fletching jig, an old but excellent fletching…
Fletching printed with TPU Arrow diameter 4mm but can be easy resized last number in file name is internal diameter my TPU: https://s.click.aliexpress.com/e/_EGGI55Z
Simple Arrow Fletching Jig for putting on 3, 4, or 5 plastic arrow vanes on a modern carbon arrow. This is straight on alignment, and does not apply a left or right helical. See different models for correct arrow size, should fit Standard…
4" fletching that can be printed in vase mode (Cura 3.40) with 0.4mm wall and a raft. It fits a 7.9mm (5/16") wooden dowel. Tested - Works great. I will try printing it with TPU. You might need to change the scaling a bit, stop printing…
These parts fit on a 3/8" dowel to make a cool little mock up of a wakanda spear. It'd not a toy, because it does come to a severe point. My nephew designed this it's his first 3D design and I think it's awesome. I'll upload pictures…
Straight Fletching Feather Clamp, seems to fit most magnetic Fetching Jigs Tested. Requires same model printed 2x. 2x Small c 19mm. 3x Washers 19.5mm Diameter (M10) 1.8mm thick. Length of 1.75 mm filament for the hing
Fetching tape is my favorite method of attaching my feathers to my arrow shafts. It is a bit tricky to handle the double sided tape, the feather and the shaft. There is a commercial dispenser available, but I like my version better. The…
What Is It? Jigs that are made for glued fletching tend to rely on the open time of the glue to get things aligned, or are otherwise complicated by needing to hold the feathers in place while the glue sets. This jig is made for simple and…
Replacement fletching for alumunium body 6.3' 6.5' crossbow bolts
Da handelsübliche Befiederungsgeräte nicht gerade günstig sind habe ich mir gedacht ich konstruiere selber eines. Viel Spaß damit! Und alle ins Gold!!! Ich habe um die drei Schiebeblöcke einen Gummi gespannt, welcher im 3D Modell nicht…
The hole for the arrow is 7mm and it works for my 4mm inner diameter arrows which are closer to 5.8mm outer diameter. It has a notch on the end to slot into your knock and line up the vanes properly. Print it vertically so you won't need…
Modification to the 2 vane fletching jig made by Stefan in order to add supports at the top of the arms to brace the bolt. Additional pieces need to be acquired from the original design, offset version of the arms were NOT used.
This is a very simple design for a fletching jig. It's designed to use minimal materials and for parts to be easily replaceable to be cheap for clubs to mass produce. Additional materials: 6x M3 25mm nuts and bolts 2-3 elastic bands…
I made this so I could store arrows in my soft case without worrying about the fletchings getting damaged. I based the design off eaton 6.5 arrows with three fletchings.
Für Schäfte von 4,5 bis 8mm Außendurchmesser Man benötigt die base, eine cap mit dem Außendurchmesser des Schafts (nächste Größe) und drei Inserts mit dem gewünschten Winkel (0°, 1°, 1,5° oder 2°) Der Bajonettverschluss funktioniert am…
Simple Arrow Fletching Jig for putting on 3, 4, or 5 plastic arrow vanes on a modern carbon arrow. This is straight on alignment, and does not apply a left or right helical. See different models for correct arrow size, should fit Standard…
Easy to use fletching jig! Insert your arrow with its nock in the tube trace the lines qith a pen, and you are ready to fletch your spiral vanes. Note: two models available one for small diameter arrow (ie: skylon paragon…) and another…
A great tool for fletching your own adder/crossbow bolts. Simply position the vanes in the holder, apply a thin layer of superglue, insert the arrow, and press the two halves together. After a short waiting period, the shells can be…
