SSK USB C Docking Station Side Of Desk Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Friend needed a way to hold their dock on the side of their desk so they have more space. Edit: Added a V2
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 425
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
(these are affiliate links I use for the client who requested this design)
EDIT: I added a second version, larger screws that can be easier for less tuned printers to print.
The screws are meant to be tight so it doesn't loosen, it also MIGHT start to go in sideways.. don't worry it will straighten its self out.
Filament: Polymaker PLA+ ( https://amzn.to/3xLVxHA )
Layer Height: 0.2
Infil: 20% Cubic
If your printer is tuned somewhat decent, it wont need supports. I did not use supports and I'm not sure how it will turn out if you choose to use supports.
The dock I used: https://amzn.to/3lQkOxr
The 90 degree USB-C extension I used: https://amzn.to/3ErE0YM