Credit Card Kit Folding Chopstick Holder (箸置きカード)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple folding Chopstick Holder in a credit card size kit (Hashi-oki, 箸置き)
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 52
- Wydruki
- 2
- Wyświetlenia
- 483
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Credit Card Kit Folding Chopstick Holder (箸置きカード)
This is a fun chopstick holder that was inspired by many trips to sushi restaurants. Normally I fold the paper wrapper that the chopsticks come in to form a makeshift Hashi-oki (箸置き) or chopstick rest.
The design is patterned from a standard credit card, and consists of two rests that can be conveniently stored wherever you keep your cards. Always ready for use.
Print Settings:
- Material: Any? (I've successfully use PLA and PETG)
- 0.2mm Layer Height
- 2 Perimeters
- 100% Infill
- Supports: No
Models for the card as well as a single folding chopstick holder are included.
Instructions:
- Remove cleverly stored Hashi-oki (箸置き)
- Carefully remove the holder(s) from the card
- Fold the holder along the seams
- Place the arm in the notch to hold the design (you may have to bend the arm a little extra to get it to stay)
- Rest Chopsticks and admire your work
- Start a conversation about 3D printing with friends who wonder why you would go through so much trouble.
I hope that you can have as much fun with this conversation starter as I did creating it.
Special thanks to Pezliz and K2_Kevin for their feedback and testing during the process! Take a moment to check out their makes and designs right here on printables.com.
Revision History:
Update to v2 - I updated the stl so that the sprue are a little easier to detach from the model.