1 / 2
Credit Card Kit Folding Chopstick Holder (箸置きカード) — image 1
1 / 2

Credit Card Kit Folding Chopstick Holder (箸置きカード)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple folding Chopstick Holder in a credit card size kit (Hashi-oki, 箸置き)

Rating
5 / 5
Likes
26
Downloads
52
Makes
2
Views
482
Reviews
2

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

Credit Card Kit Folding Chopstick Holder (箸置きカード)

This is a fun chopstick holder that was inspired by many trips to sushi restaurants.  Normally I fold the paper wrapper that the chopsticks come in to form a makeshift Hashi-oki (箸置き) or chopstick rest.

The design is patterned from a standard credit card, and consists of two rests that can be conveniently stored wherever you keep your cards.  Always ready for use.

Print Settings:

  • Material: Any? (I've successfully use PLA and PETG)
  • 0.2mm Layer Height
  • 2 Perimeters
  • 100% Infill
  • Supports: No

Models for the card as well as a single folding chopstick holder are included. 

Instructions:

  1. Remove cleverly stored Hashi-oki (箸置き)
  2. Carefully remove the holder(s) from the card
  3. Fold the holder along the seams
  4. Place the arm in the notch to hold the design (you may have to bend the arm a little extra to get it to stay)
  5. Rest Chopsticks and admire your work
  6. Start a conversation about 3D printing with friends who wonder why you would go through so much trouble.

I hope that you can have as much fun with this conversation starter as I did creating it.

Special thanks to Pezliz and K2_Kevin for their feedback and testing during the process!  Take a moment to check out their makes and designs right here on printables.com. 

Revision History:

Update to v2 - I updated the stl so that the sprue are a little easier to detach from the model.

 

Tags