Print-In-Place Travel Tic-Tac-Toe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tic-Tac-Toe, on the go! Features print-in-place captured pieces so you never lose them!
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 305
- Wydruki
- 1
- Wyświetlenia
- 1447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Share Alike
Everyone knows how to play tic-tac-toe, but when you 3d print it the pieces go missing! Not to worry, you can just print more… but the wasted plastic adds up. Having just experimented with print-in-place hinges, I decided to create a travel version of the classic Tic-Tac-Toe that had captured rotating pieces. Minimal supports are needed, but are easily removed - and the pieces break free and rotate before you're done removing the supports!
Recommend printing at 0.2mm layer height, any filament, and supports from the print bed. Either snug or organic supports in PrusaSlicer 2.6+ will work really nicely!