dropController Project Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this box for the dropController brand of valve control for water drop photography. It's a tight fit, so be…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 409
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I designed this box for the dropController brand of valve control for water drop photography. It's a tight fit, so be careful fitting the board to the box. It's made to use the top and bottom standoffs that came with the kit, and the clear top cover.
I replaced the plastic screws with M3x10mm screws, but they don't need to be that long, just what I had around.
The cutout for the USB may have to be modified for your cable. I made it big enough to fit my cable end.
I used supports on the holes.
Pics shown were altered by hand with a drill, STL has changed dimensions so all holes should fit as printed.
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Select Plus
Rafts:
No
Supports:
Yes
Resolution:
.2mm
Infill:
10%
Filament: Generic PLA
Category: Hobby