dropController Project Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed this box for the dropController brand of valve control for water drop photography. It's a tight fit, so be…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 409
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I designed this box for the dropController brand of valve control for water drop photography. It's a tight fit, so be careful fitting the board to the box. It's made to use the top and bottom standoffs that came with the kit, and the clear top cover.
I replaced the plastic screws with M3x10mm screws, but they don't need to be that long, just what I had around.
The cutout for the USB may have to be modified for your cable. I made it big enough to fit my cable end.
I used supports on the holes.
Pics shown were altered by hand with a drill, STL has changed dimensions so all holes should fit as printed.
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Select Plus
Rafts:
No
Supports:
Yes
Resolution:
.2mm
Infill:
10%
Filament: Generic PLA
Category: Hobby