Ikea lack filament guide "muffled"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
remix of this great design: https://www.prusaprinters.org/prints/30576-ikea-lack-filament-guide This removes the…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 76
- Wydruki
- 1
- Wyświetlenia
- 923
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
remix of this great design:
https://www.prusaprinters.org/prints/30576-ikea-lack-filament-guide
This removes the vibrations from the filament going through the ikea table.
Print the damper in soft TPU with 2 bottom layers, 2 shells, no infill and no top layers.
Print the two other pieces with PETG with 25% infill
I have attach an .3mf file for the "damper" with my layer settings.
Insert it in "topskrue" and stick a piece of bowden tube through.
Print instructions
print in petg
0.2mm
damper in tpu
0.2mm
pictures show a black "damper" i didn´t have white :)
