Tripod Adapter for Chelegance MC-750 Antenna
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Tripod Adapter for the Chelegance MC-750 Antenna by JNC Radio.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 766
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
A Tripod Adapter for the Chelegance MC-750 Antenna by JNC Radio.
EDIT 3/7/2023: Made the print thicker as the weight of the antenna would cause it to easily bend on the tripod. This version now fully encapsulates the ¼-20 coupling nut.
In one of the video tutorials, Chelegance shows how to use a tripod instead of the ground spike to deploy the antenna. The Spike used has an M10 thread. The problem, is that an adapter that converts a standard ¼-20 screw to M10 is extremely hard to find. Most camera tripods have a male ¼-20 screw built into the mount so I designed a piece that attaches using a ¼-20 coupling nut and an M10 bolt. I also added another hole so that you can use the ground spike as well.
To Build this you will need the following Hardware (found at my local Home Depot):
- M10 x 40mm Bolt: https://www.homedepot.com/p/Everbilt-10-mm-1-5-x-40-mm-Zinc-Plated-Metric-Hex-Bolt-36088/202209671
- M10 Nut: https://www.homedepot.com/p/Everbilt-M10-1-50-Zinc-Metric-Hex-Nut-3-per-Bag-802428/204281771
- ¼-20 Coupling Nut: https://www.homedepot.com/p/Everbilt-1-4-in-20-TPI-Zinc-Rod-Coupling-Nuts-822251/204337387
- ¼-20 x ¾" Screw: https://www.homedepot.com/p/Everbilt-1-4-in-20-x-3-4-in-Combo-Round-Head-Stainless-Steel-Machine-Screw-2-Pack-814481/204274815