Spoolholder Anet A8
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
i lost the bolt that came with the Anet A8 spool holder so i designed a new sturdy one
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 42
- Wydruki
- 1
- Wyświetlenia
- 481
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
i lost the bolt from the Anet A8 diy kit that holds the spool i previously designed a simple holder (see picture a green stick) 3 years ago but it snapped while printing high speeds and heavy spools
so i designed a V2 which is bigger in size and stronger i also added a 3mm hole through out the part just like the original to use a TIG welding rod as inner support to make it even stronger to lock the rod in lpace i used 2 3mm screws
printed in PLA Prusament Galaxy black at 210 degrees C and 55 on the bed (PEI) at a speed of 150mm/s and 80mm/s outer wall and support