1 / 9
VW Caddy Crafter Transporter ceiling light LED conversion plate
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base plate for easy conversion to LED light for VW interior light for lamp part number 7e0 947 105e
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 986
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (14)Powiązane
- This is only support plate for leds. Yoy can use led strips, led COB or what you have - glue it to this plate
- This is plate for lamp with vw part number 7e0 947 105e and 7e0 947 105f - used in VW caddy, transporter, crafter etc cars. Mayby it will work with other versions - I dont know.
- THIS ITEM SHOULD BE PRINTED IN ABS (or PETG at last) - not PLA. PC will be best.
PLA works in hand and is usefull for testing, but in car, inside lamp, in full sunlight - will be too hot for PLA, it will be melted and make big troubles and maybe fire. Dont use it here.
Led plate have 3 standoff with blind holes - can be drilled thru (2mm drill) and thru holes - driled lamp base, 3 small screws and plate is mounted. Or you can use some glue.
Side mounts have 2 holes for some bare wire winding - it should contact with lamp electrodes and works without soldering.