1 / 9
VW Caddy Crafter Transporter ceiling light LED conversion plate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Base plate for easy conversion to LED light for VW interior light for lamp part number 7e0 947 105e
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 32
- Makes
- 1
- Views
- 984
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
- This is only support plate for leds. Yoy can use led strips, led COB or what you have - glue it to this plate
- This is plate for lamp with vw part number 7e0 947 105e and 7e0 947 105f - used in VW caddy, transporter, crafter etc cars. Mayby it will work with other versions - I dont know.
- THIS ITEM SHOULD BE PRINTED IN ABS (or PETG at last) - not PLA. PC will be best.
PLA works in hand and is usefull for testing, but in car, inside lamp, in full sunlight - will be too hot for PLA, it will be melted and make big troubles and maybe fire. Dont use it here.
Led plate have 3 standoff with blind holes - can be drilled thru (2mm drill) and thru holes - driled lamp base, 3 small screws and plate is mounted. Or you can use some glue.
Side mounts have 2 holes for some bare wire winding - it should contact with lamp electrodes and works without soldering.