Mavic 2 Propeller Case

These 3D printed cases are designed to provide some protection for DJI Mavic 2 Propellers when travelling or in storage. I remove my propellers when I travel with the drone, so a way to store them safely is important, this design makes them easily accessible, and keeps them in pairs or individually and doesn't require a bulky case.

To use these cases, you need to match the case to the prop's orientation (CCW or CW). For example, looking at the case mount if there's a 'O' on it, that matches the props with the white circle on them (Counter-clockwise in this scenario). The propellers need to be then folded a certain way, placed in the case mount and then rotated closed, held in place by a unique clip system.

Compatibility

This has been tested in the Mavic 2 Pro Original Propellers but it should work ok in the other Mavic 2 models if the use the same DJI propeller design.

• Mavic 2 Pro
• Mavic 2 Zoom
• Mavic 2 Enterprise

Features

• Designed for Mavic 2 Props to quickly attach and detach using its own quick mount action
• Unique minimalist design
• Easy storage and release system
• Single and dual propeller designs available

If anyone finds any problems (dimensionally or otherwise) post them up, so I can get them fixed.

Instructions

• All parts should orientate correctly on slicer plate
• After printing, check it operates correctly
• IMPORTANT Correctly match case to propeller as there are different mounts depending on if it's Clockwise (CW) or Counter-clockwise (CCW)
• The indicator for CCW Mount is a raised circle and CW mount is without this.
• This was printed in PLA but PETG may be better for the propeller plastic, although I have not tested this.
• After printing, check the surface of the case is smooth for the propeller to slide against

Steps on how to use the case...

This example demonstrates a Counter-clockwise (CCW) Prop. Orientation is reversed using a Clockwise (CW) Prop and the matching case.

EXPERIMENTAL DESIGN

This model has been designed for a specific usecase, it has not yet undergone extensive testing. Constructive feedback is appreciated.

Propeller Cases Available for...

• Mavic 2 Low-Noise Propeller Case | Thingiverse | Printables | Cults 3D
• Mavic 3 Propeller Case | Thingiverse | Printables | Cults 3D
• Air 2S Propeller Case | Thingiverse | Printables | Cults 3D

Print Settings

Walls: 3 or 4 lines

Infill: 15%

Rafts: No

Brim (Optional): 3 - 5mm

Supports: No

Resolution: 0.2mm or better

Notes: Printable using PLA or PETG or even TPU