Din Mount for my Launchpad Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Din Mount to fasten my Launchpad Mount to a Din rail. I designed it for Clough42's lathe Electronic Lead Screw
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I am working on the Electronic Lead Screw project designed by James from (Clough42) on Youtube. I wanted to mount my TI Launchpad to a din rail. These din rail mount are to be used with the Launchpad mount I designed. Also posted on Printables. You will need four M3 heatset inserts and M3x8mm screws. Print them laying on their sides. Mine are printed from PETG. I'm not sure how they would work if printed in PLA or something else. 3 perimeter walls, 10-20% infill.
Thanks for looking and please leave comments. I like to see what you have to say about my designs either good or bad.