Pavel the Ghost lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a lamp shade, which uses 27mm e14 cords and bulbs to illuminate the dark Halloween night.
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 147
- Wydruki
- 1
- Wyświetlenia
- 1008
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a lamp shade, which uses 27mm e14 cords and bulbs to illuminate the dark Halloween night. It can also be used as a nightlight, if paired with a low output bulb (the glow in the dark filament makes for a great effect)
This is IKEA Stråla compatible, for which there is a separate file. (It uses the same thread, but has a different strain relief to fit a ready assembled cord)
It's a support less single print design (plus the strain relief), and the integrated middle support is snapped off after printing. The cord threads in to the bottom and you can fit LED's less than 27mm in diameter (the little IKEA lights for example).
Toss a like, post a make and maybe follow me over at the IG's or YT
https://www.instagram.com/superbeasti/
https://www.youtube.com/channel/UCjYzBKKl0BfKuw2VQgK8AQg
Print instructions
Nothing special, it's a simple print and assembly. You can test the fitting of the threads with the included ikea_strala_thread file before printing the real deal.