1 / 3
Ceiling Fan Light Diffuser Small Dome — zdjęcie 1
1 / 3

Ceiling Fan Light Diffuser Small Dome

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Light diffuser made for half-height LED bulbs

Ocena
0 / 5
Polubienia
4
Pobrania
39
Wydruki
0
Wyświetlenia
592
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I initially printed the light diffuser dome for my living room ceiling fan as the bulbs are quite bright and blinding if you glance in their direction. However, I quickly found the original diffuser was designed with full-size bulbs in mind. I had bought half-height bulbs specifically because my ceiling fan is low, and I'd constantly hit it when playing VR. The smaller bulbs raise the ceiling and greatly reduce the chance of smacking it while playing Beat Saber.

So, I designed a dome specifically to fit these smaller bulbs and not stick out much lower. I was also getting frustrated with the dome cracking while trying to remove supports, so I made a flat edge to serve as a base for the print and results in minimal supports.

I printed mine on an Anycubic Kobra with glow-in-the-dark PLA, giving it a cool green glow after turning the light off.

Tagi